Stroud & the Five Valleys

Diamond Drilling & Concrete Cutting in Stroud

Core drilling, test cores and saw cutting for Stroud's old mills, stone houses and business units, across the town, Stonehouse and the Five Valleys.

  • DSA Member
  • Mills & Stone Buildings
  • Free Quotes
5.0 from 19 Google reviews
Numbered test holes core drilled through a floor in Stroud
120+Jobs Completed
Liam PalmerFounder & Diamond Driller
Liam Palmer, founder of LAP Diamond Drilling, carrying a concrete core on site

Working in Stroud

Mills, Hills and Cotswold Stone

Stroud sits where five steep valleys meet on the edge of the Cotswolds. For centuries the valleys were lined with woollen cloth mills, and many of those big stone mill buildings are still standing, now used as offices, workshops, flats and studios. Ebley Mill, for example, has been converted into offices.

Most houses are Cotswold stone, many built into the hillsides, while the newer business parks sit on the flatter ground at Stonehouse, close to the M5. Work here ranges from coring through thick mill walls to taking test cores from floors before a building is altered or extended.

01

Converted Mills

Mill conversions need new routes for pipes, ducts and cables through thick stone walls and floors. Diamond coring cuts them cleanly, without hammering at old masonry.

02

Hillside Houses

Houses on Stroud's steep streets often have split levels and walls partly below ground, so holes for drains, flues and vents are placed with care and sealed properly afterwards.

03

Business Units at Stonehouse

Units on the business parks around Stonehouse need service cores, floor cuts and new openings when they're fitted out, extended or change hands.

How test cores work

Taking Test Cores from a Floor

Before a floor is cut, loaded or built on, engineers and contractors often need to know what's inside it: how thick the slab is, whether there's screed or insulation on top, and what it sits on.

A diamond core drill cuts a clean, round sample right through the floor. The core comes out in one piece showing each layer, and the hole is measured to give the exact thickness. Each hole is numbered and recorded, so the results match up with the drawings.

Nothing is broken out, so the test holes stay small and neat and are easy to fill once the results are in.

Floor cross-section

One core, every layer

Diagram of a test core taken through a floorSection through a floor made of screed, insulation, a concrete slab and a sub-base. A diamond core has been drilled through all the layers, and the core lifted out beside the hole shows each layer, so the depth of every layer can be measured. Further test positions are numbered on the floor surface.231ScreedInsulationSlabSub-baseEverylayermeasuredCore lifted outNumbered test positions
Illustration only. The layers and their thickness vary from building to building, which is exactly why test cores are taken.

Methods we use in Stroud

Test Coring

Numbered cores through floors and walls so engineers can see the build-up and thickness before work is designed.

Large Cores Through Stone

Big diameter cores through thick mill and house walls for ducts, extraction and new services.

Stitch Drilling

A line of overlapping cores to cut out an opening where a saw can't reach, useful in very thick stone walls.

Floor Sawing

Straight cuts through concrete floors in mills and business units for drains, trenches and slab removal.

What we do in Stroud

Our Services in Stroud

Our three core services across Stroud, from mill conversions and stone houses to business units down in the valley.

Core Drilling in Stroud

Test cores, service holes and large cores through stone, brick and concrete, from converted mills to homes in the valleys and units at Stonehouse.

Diamond core drilling →

Saw Cutting in Stroud

Openings in walls, cut-outs in floors and trenches for drains, in stone, block and concrete. Openings in structural walls need an engineer's design and support first.

Concrete saw cutting →

Chasing in Stroud

Cable and pipe chases for electricians and plumbers working on rewires, conversions and new builds, cut to depth with dust extraction.

Wall and floor chasing →

Working with reinforced concrete floors? Read what's involved in core drilling through reinforced concrete.

Our process

How a Stroud Job Works

Most Stroud jobs are priced from photos, drawings or a test-hole plan, with no site visit. A typical job runs like this.

01

Send Photos or a Test Plan

Photos of the wall or floor, the hole sizes or test positions, any drawings or engineer's notes, and the address in Stroud or the valleys.

02

Price and Access Agreed

Liam replies with a fixed price and a date, usually within 24 hours, and checks the access, as some of the hill streets and mill yards are tight.

03

Set Out and Number

Hole positions are marked out and numbered against the drawings, and the water feed and slurry collection are set up.

04

Core, Record, Hand Over

Cores drilled, depths measured and recorded where needed, slurry cleared up, and the site handed back.

Send your job
Get a Free Quote

Tell us about the job and add a few photos. Liam replies with a fixed price, usually within 24 hours.

Rather send photos on WhatsApp? Message Liam on 07833 445534

Recent job in Stroud

Numbered Test Cores Through a Stroud Floor

Liam cored a run of test holes through a floor in Stroud. Each hole was numbered, measured and recorded for the client.

The cores came out clean and round, so the thickness and make-up of the floor could be read straight from each hole, and the holes were simple to fill afterwards.

Numbered test holes core drilled through a floor in Stroud (1 of 5)
Numbered test holes core drilled through a floor in Stroud (2 of 5)
Numbered test holes core drilled through a floor in Stroud (3 of 5)
Numbered test holes core drilled through a floor in Stroud (4 of 5)
Numbered test holes core drilled through a floor in Stroud (5 of 5)

Where we work

Stroud and the Five Valleys

Stroud is about 35 miles from our base in Bristol, up the M5. We cover the town, the valleys around it and nearby towns, including:

  • Stonehouse
  • Cainscross
  • Ebley
  • Rodborough
  • Uplands
  • Whiteshill
  • Painswick
  • Nailsworth
  • Minchinhampton
  • Brimscombe
  • Thrupp
  • Chalford
  • Bisley
  • King's Stanley
  • Leonard Stanley
  • Dursley
  • Cam
  • Wotton-under-Edge
  • Gloucester

FAQs

Diamond Drilling in Stroud: Your Questions

Do you cover Stroud and the Five Valleys?

Yes. Stroud is about 35 miles from our base in Bristol, up the M5. We cover the town and the valleys around it, including Stonehouse, Nailsworth, Painswick, Minchinhampton and Chalford.

Can you take test cores for an engineer or surveyor?

Yes. Cores are drilled at the positions on the drawings, numbered, and the depths recorded, so the engineer can see exactly how the floor or wall is built up.

Can you drill through the walls of an old mill?

Yes. Diamond coring cuts cleanly through thick stone mill walls. Many of the valley mills are in Stroud District's Industrial Heritage Conservation Area and some are listed, so check with Stroud District Council before any work.

Can you cut an opening in a thick stone wall?

Yes. Openings in thick stone are cut with a wall saw or by stitch drilling, where overlapping cores cut out the shape. A new opening in a structural wall needs an engineer's design and temporary support first.

Do you work on the business parks at Stonehouse?

Yes. We core service holes, cut floors and form new openings in commercial and industrial units at Stonehouse and around Stroud.

How do I get a price for a job in Stroud?

Send photos, the sizes and any drawings or test-hole plan. You'll get a fixed price and a date from Liam, usually within 24 hours of sending them.

Get a Free Quote in Stroud

Send photos, hole sizes and any drawings or test plan. Liam replies within 24 hours with a fixed price and a date for your Stroud job.

Call Liam07833 445534