Chippenham, Corsham & Calne
Diamond Drilling & Wall Chasing in Chippenham
Wall chasing, core drilling and saw cutting for Chippenham's homes, shops and business parks, from stone terraces near the river to new estates on the edge of town.
- DSA Member
- Dust-Extracted Chasing
- Free Quotes


Working in Chippenham
An Old Market Town That Keeps Growing
Chippenham is a market town on the River Avon, with a centre of stone buildings around the Market Place and the Yelde Hall, and Brunel's railway passing through on its way from Bristol to London. Much of the old centre is a conservation area.
Around it, the town has grown quickly. Business parks and industrial estates such as Bumpers Farm and Methuen Park sit on the west side, and large new housing estates keep spreading out from the edges. A week here can mean chasing out a rewire in a stone terrace one day and coring service holes in a warehouse unit the next.
Rewires in Older Houses
Stone and brick terraces near the centre often need new routes for cables and pipes. Chases are cut to a set depth with a twin-blade chaser, so the plaster either side stays sound and there's less to make good.
New Estates and Extensions
Electricians and plumbers on new builds and extensions around the edge of town use chasing for sockets, switches and pipe runs, and coring for soil pipes, flues and extractor fans.
Business Parks
Units at Bumpers Farm, Methuen Park and the other estates need service cores, floor cuts and new openings when they're fitted out or change use.
How we cut a wall chase
Cutting a Clean Wall Chase
A wall chase is a groove cut into a wall so cables, conduit or small pipes can sit flush and be plastered over. It's one of the most common jobs for electricians and plumbers working in Chippenham's houses and offices.
A wall chaser has two diamond blades side by side. One pass cuts two parallel slots at a set width and depth, then the strip of brick, block or stone between them is knocked out with a bolster. A vacuum connected to the chaser pulls the dust away as it cuts.
Because the depth is set on the machine, the chase is the same all the way along, with straight edges and no over-cutting into the wall around it.
Wall cross-section
Two blades, one straight chase
Methods we use in Chippenham
Wall Chasing
Twin-blade chasing in brick, block and stone for cables, conduit and pipes, with the depth set before every cut.
Floor Chasing
Chases cut into concrete floors and screeds for pipes and cables, at an even depth so the floor can be made good flat.
Handheld Coring
Soil pipe, flue, vent and extractor holes through house walls, cored cleanly from inside or out with no hammering.
Wall Sawing
Straight-edged openings in concrete and block walls for doors and hatches in commercial units and extensions.
What we do in Chippenham
Our Services in Chippenham
Our three core services across Chippenham, from rewires and extensions in the town to fit-outs on its business parks.
Core Drilling in Chippenham
Holes for soil pipes, boiler flues, extractor fans and ducts through brick, block and stone, plus service cores through floors and walls in commercial units.
Diamond core drilling →Saw Cutting in Chippenham
Openings in block and concrete walls, cut-outs in floor slabs and trenches for new drains. Openings in structural walls need an engineer's design and support in place first.
Concrete saw cutting →Chasing in Chippenham
Wall and floor chases for electricians and plumbers on rewires, extensions and new builds, cut to depth with a dust-extracted chaser.
Wall and floor chasing →Planning chases for cables or underfloor pipes? Read our guide to choosing the right tool for wall and floor chasing.
How a Chippenham Job Works
Most Chippenham jobs are priced from a few photos and a rough plan, with no site visit. This is how it goes, from the first photos to the finished chases.
Send Photos and a Plan
Photos of the walls or floor, where the chases or holes need to go, rough lengths and sizes, and the address in or near Chippenham.
Get a Fixed Price
Liam replies with a fixed price and a date, usually within 24 hours, and tells you what needs clearing before he arrives.
Protect and Mark Out
Floors and furniture are covered, chase lines and hole positions are marked and checked against your plan, and the extraction is set up.
Cut, Clean Up, Hand Over
Chases cut to depth and holes cored, the dust and debris cleared away, and the walls left ready for the electrician, plumber or plasterer.
Tell us about the job and add a few photos. Liam replies with a fixed price, usually within 24 hours.
Rather send photos on WhatsApp? Message Liam on 07833 445534
Recent job in Chippenham
Dust-Extracted Wall Chasing in Chippenham
Liam cut a set of wall chases in a building in Chippenham, using a twin-blade wall chaser hooked up to an extraction vacuum.
The chases run straight and at an even depth, so cables or pipes sit flush and the plasterer only has to fill the groove, not repair the wall around it.


Where we work
Chippenham and the Towns Around It
Chippenham is about 25 miles from our base in Bristol, along the A420 or the M4. We cover the town and the area around it, including:
FAQs
Diamond Drilling in Chippenham: Your Questions
Do you cover Chippenham and the villages around it?
Yes. Chippenham is about 25 miles from our base in Bristol. We cover the town and nearby places like Corsham, Calne, Lacock, Box and Melksham.
How deep can a wall chase be?
Building Regulations set limits. Vertical chases should be no deeper than a third of the wall's thickness, and horizontal chases no deeper than a sixth. The chaser is set to the right depth before cutting.
Is wall chasing dusty?
Far less than cutting by hand. The chaser is connected to an extraction vacuum that pulls the dust away as it cuts, and floors and furniture are covered before work starts.
Can you chase walls in an older stone house in the town centre?
Yes, chasing internal walls is common in older stone houses. If the house is listed, check with Wiltshire Council first, because listed building consent can cover internal work as well as outside changes.
Can you core the holes for a new extension?
Yes. Soil pipe, boiler flue and extractor fan holes are cored through brick, block and stone with a diamond core drill, leaving a clean round hole with no hammering.
How do I get a price for a job in Chippenham?
Send photos and a rough plan of where the chases or holes need to go. Liam will come back with a fixed price and a date, normally within a day.
Get a Free Quote in Chippenham
Send photos and a rough plan of the chases or holes. Liam replies within 24 hours with a fixed price and a date for your Chippenham job.