Bristol & the South West

Concrete Saw Cutting in Bristol

Wall, ring and floor sawing for door openings, drains and slab work across Bristol and the South West.

  • DSA Member
  • Wet Cutting, Low Dust
  • Free Quotes from Photos
5.0 from 19 Google reviews
Track-mounted diamond wall saw cutting an opening in a concrete wall in Bristol
120+Jobs Completed
Liam PalmerFounder & Diamond Driller
Liam Palmer with a ring saw in front of the LAP Diamond Drilling van

What We Do

Saw Cutting for Openings, Drains and Slabs

LAP Diamond Drilling provides concrete saw cutting in Bristol for builders, groundworkers and homeowners. We use diamond blade wall saws, ring saws and floor saws to cut through concrete, block, brick and stone accurately, cleanly and without the vibration of breaking out.

Most of our work is new door and window openings, widening existing openings, ACO drain runs and cutting slabs out for drains and services. Every cut is done wet to keep dust down, and Liam is on every job from survey to final cut.

With a strong foundation built on expertise and industry recognition, LAP Diamond Drilling became a trusted name in the field, delivering precision and reliability in every project.

Which Saw, Where

Walls, Slabs and Surfaces

FLAT SAWWALL & RINGFLOOR SAW Roads & yardsOpeningsSlabs & drains
ThroughConcreteBlockBrickStone

Our Saw Cutting Methods

Flat Saw Cutting

Straight cuts in roads, yards and paths, cut on the surface.

Wall Saw Cutting

Track-mounted saw for openings and reinforced walls.

Ring Saw Cutting

Handheld saw for openings in walls up to 270mm thick.

Floor & Slab Saw Cutting

Deep cuts so slabs lift out in sections for drains & services.

Methods at a glance

Which Saw Cutting Method Do You Need?

Each saw suits a different job. The table below shows what Liam uses each one for and how deep it cuts in a single pass. Send a photo of the wall or floor and he’ll tell you which method fits.

MethodBest forMax cut depthGood to know
Wall sawingDoor and window openings, widening openings, cutting reinforced concrete wallsUp to about 730mmTrack-mounted, so cuts are straight and square. Can cut from both sides for thicker walls.
Floor sawingSlab removal, trenches for drains and services, ACO channels, expansion jointsUp to about 500mmWalk-behind saw for long, straight cuts in slabs, yards and car parks.
Ring sawingOpenings in tight spaces, finishing corners without overcuts, smaller openings in block and brickUp to about 270mmHandheld, so it works where a wall saw won’t fit.
Handheld cut-off sawKerbs, paving, flush-cutting, small trims and making goodUp to about 150mmQuick to set up for short cuts and small jobs.

Depths are typical single-pass maximums and depend on the material and access. Need to know if you need an engineer first? Read when you need a structural engineer for a wall opening.

Recent saw cutting jobs

Saw Cutting Jobs Liam Has Done

A few recent openings and cuts, from a lift shaft in Bristol to heavy track sawing in Avonmouth.

Concrete floor slab cut out and removed to form a lift shaft in a building in Bristol (1 of 6)
Slab cutting · Bristol

Lift Shaft Cut-Out in Bristol

A section of concrete floor slab cut out and removed to make way for a new lift shaft in a Bristol building.

Track sawing through thick concrete walls inside an industrial building in Avonmouth (1 of 8)
Track sawing · Avonmouth

Track Sawing in Avonmouth

Thick concrete walls cut with a track-mounted saw inside a large industrial building in Avonmouth.

New door opening cut through an external wall in Bristol, boarded up ready for the frame (1 of 3)
Door opening · Bristol

New Door Opening in Bristol

A new door opening cut through an external wall in Bristol, boarded up and ready for the frame to go in.

Door openings cut through blockwork walls in a warehouse in Swindon, now fitted with roller shutters (1 of 3)
Door openings · Swindon

Warehouse Door Openings in Swindon

Openings cut through blockwork walls in a Swindon warehouse, now fitted with roller shutters.

Why Saw Cutting Beats Breaking Out

Operative cutting concrete with a handheld diamond cut-off saw

PRECISE CUTS

A diamond blade cuts exactly to the marked line, so a new opening comes out square and ready for a lintel or frame. There’s no ragged edge to make good afterwards, and no loose brick or blockwork around the opening.

Diamond wall saw blade cutting through a reinforced concrete wall

VERSATILE APPLICATIONS

One visit can cover a new doorway in a block wall, a widened opening in reinforced concrete, an ACO drain run across a yard or a slab cut out for new services. We pick the saw to suit the job and the access.

Walk-behind floor saw cutting a concrete slab

MINIMAL DISRUPTION

Sawing doesn’t hammer the structure the way a breaker does, so cracking spreads less and the work is quieter. That makes it the better option in lived-in homes, occupied offices and shops that need to stay open while the work is done.

Floor saw wet cutting concrete with water to control dust

DUST CONTROL

We cut wet, so the water traps the dust at the blade instead of filling the room. Slurry is contained and cleaned up as we go, which keeps the site safer and keeps the work in line with HSE silica dust guidance.

Why Choose Us

Built on Trust, Driven by Excellence

Proven Expertise

Openings, drains and slab cutting for builders and homeowners across the South West.

Skilled Craftsmanship

Liam cuts every job himself, so the standard doesn't drop between jobs.

Top-Tier Equipment

The right wall, ring or floor saw for each job, from tight openings to deep slab cuts, all cut wet.

Transparent Communication

Clear prices up front, and you'll know when we're arriving and when we'll finish.

Our process

How a Saw Cutting Job Works

Most jobs are priced from photos, with no site visit. Here's what happens from your first message to the finished opening.

01

Send Photos and Sizes

A photo of the wall, floor or slab with the cut marked, the opening size and thickness, and the town or postcode.

02

Fixed Price and a Date

Liam replies with a fixed price and a date, usually within 24 hours. For structural openings, we'll ask for the engineer's details first.

03

Scan, Protect and Set Up

We check for cables, pipes and rebar, sheet the area and set up water control and slurry collection.

04

Cut, Clean Up and Check

Straight, clean cuts with wall, ring or floor saws, slurry taken away and the opening left ready for the next trade.

Send your job
Get a Free Quote

Tell us about the job and add a few photos. Liam replies with a fixed price, usually within 24 hours.

Rather send photos on WhatsApp? Message Liam on 07833 445534

Service Areas

Concrete Cutting Across Bristol and the South West

Concrete saw cutting across Bristol and the South West: door and window openings, drain runs and slab cutting for builders, groundworkers and homeowners.

Get a Free Quote

FAQs

Concrete Saw cutting FAQs

Do I need a structural engineer for a new opening?

Usually, yes, if the wall is load-bearing. Most new door or window openings in a load-bearing wall need an engineer’s calculations for the lintel and Building Control sign-off before we cut. The wall also needs propping while the lintel goes in. Non-load-bearing walls are simpler. If you’re not sure, send Liam a photo and he’ll tell you what you need before you book.

It depends on the saw. Our ring saw cuts openings in walls up to around 270mm thick. Thicker walls and deep slab cuts are done with the wall saw or floor saw. Tell us the thickness and material when you send your photos and we’ll confirm the right method.

Yes. Diamond blades cut through steel rebar as well as the concrete, so reinforced walls, slabs and lintels are cut cleanly in one pass, without breaking out.

Far less than breaking out. We cut wet, so the water traps the dust at the blade. The slurry it creates is contained and cleaned up as we go, which keeps the site safer and keeps the work in line with HSE silica dust guidance.

Most standard door openings in block or concrete are cut in a few hours once the lintel and propping are in place. Larger openings, reinforced concrete or restricted access can take longer. We’ll give you a time on the quote.

Send a photo of the wall or slab and the size you need cut to Liam on 07833 445534 (call or WhatsApp) or liam@lapdiamonddrilling.co.uk. Quotes are free. We cover Bristol, Bath and the wider South West.

Call Liam07833 445534