Taunton & Somerset

Diamond Drilling & Wall Sawing in Taunton

Wall sawing, core drilling and chasing for Taunton's homes, offices and business parks, and the new estates growing around the county town.

  • DSA Member
  • Openings & Wall Sawing
  • Free Quotes
5.0 from 19 Google reviews
New door opening cut through a wall with a diamond wall saw
120+Jobs Completed
Liam PalmerFounder & Diamond Driller
Liam Palmer, founder of LAP Diamond Drilling, carrying a concrete core on site

Working in Taunton

A County Town on the Move

Taunton is Somerset's county town, set on the River Tone just off the M5. Its centre mixes Georgian and Victorian buildings with shops and offices, and the large Firepool site in the middle of town is being regenerated with new homes and a leisure quarter.

Around the edges, Taunton is one of the fastest growing towns in the South West, with big new housing areas like Monkton Heathfield and Staplegrove, and business parks along the motorway. Plenty of the work here is opening up walls: new doorways, knock-throughs and openings in extensions and commercial units.

01

Knock-Throughs in Older Homes

Kitchen-diners and open-plan layouts in Taunton's terraces and semis mean new openings in brick and block walls, cut cleanly once the engineer's support is in place.

02

New Estates

On the growing estates, electricians, plumbers and groundworkers need cores for services and drainage, and chases for second fix.

03

Business Parks and Offices

Units and offices near the M5 need new doorways, service cores and floor cuts when they're fitted out or split up.

How we cut an opening

Cutting a Door Opening with a Wall Saw

A new door opening starts with an engineer's design. Props and a new lintel or steel go in above the opening first, so the wall above is carried before anything is cut.

The corners are cored first, so the saw cuts stop cleanly without over-cutting. A track is then fixed to the wall and the wall saw runs along it, cutting the sides, top and bottom in straight lines.

The cut section comes out in manageable blocks, leaving square, smooth edges ready for the frame. There's no hammering, so the wall around the opening stays sound.

Wall elevation

Support first, then cut

Diagram of a door opening cut with a track-mounted wall sawFront view of a wall with a new door opening marked out. A lintel and props carry the wall above. The four corners are cored first, then a wall saw running on a track fixed to the wall cuts the sides, top and bottom in straight lines.Lintel in firstWall sawon a trackPropsCorners coredfirstNew opening
Illustration only. Every opening in a load-bearing wall needs an engineer's design and temporary support before it is cut.

Methods we use in Taunton

Track Wall Sawing

Track-mounted sawing for door and window openings in concrete, block and brick, with straight edges and clean corners.

Ring Sawing

Handheld ring sawing for deeper cuts in smaller openings where a track saw won't fit.

Service Coring

Holes for soil pipes, ducts, flues and cables through walls and floors on new builds and refits.

Chasing for Second Fix

Wall and floor chases for cables and pipes on new estates and extensions, cut to depth with dust extraction.

What we do in Taunton

Our Services in Taunton

Our three core services across Taunton, from knock-throughs in older homes to new estates and units near the M5.

Core Drilling in Taunton

Cores through brick, block and concrete for soil pipes, ducts, flues and cables, on refits, new builds and commercial fit-outs.

Diamond core drilling →

Saw Cutting in Taunton

Door openings, knock-throughs and floor cuts with track-mounted and ring saws. Structural openings need an engineer's design and support first.

Concrete saw cutting →

Chasing in Taunton

Chases for electricians and plumbers on rewires, extensions and second fix on new estates, cut with a dust-extracted chaser.

Wall and floor chasing →

Planning a new opening? Read when you need a structural engineer for a wall opening.

Our process

How a Taunton Job Works

Most Taunton jobs are priced from photos and the engineer's drawings, with no site visit. For openings, the support needs to be in place before the cutting day.

01

Send Photos and Drawings

Photos of the wall, the size of the opening or holes, the engineer's drawings if there are any, and the address in or around Taunton.

02

Price and Cutting Day

Liam comes back with a fixed price and a cutting day, usually within 24 hours, and lists what needs to be propped or cleared first.

03

Corners and Track

The opening is marked out, the corners cored, and the track fixed to the wall ready for the saw.

04

Cut, Remove, Tidy

Sides, top and bottom cut, the section taken out in blocks, slurry cleaned up, and the opening ready for the frame.

Send your job
Get a Free Quote

Tell us about the job and add a few photos. Liam replies with a fixed price, usually within 24 hours.

Rather send photos on WhatsApp? Message Liam on 07833 445534

Recent job in Somerset

Drilling Through Tarmac on a Somerset New Build

On a new housing development in Somerset, Liam drilled a series of holes through the tarmac on the estate roads, so rainwater can drain down through the permeable surface underneath.

Each hole is cored straight down to the same depth, with clean edges that don't crack the tarmac around them.

Where
New housing development, Somerset
Client need
Drainage through a permeable road surface
Method
Diamond core drilling
Result
Clean, even holes with no cracking
See more recent projects
Holes drilled through tarmac on a new housing development in Somerset
Estate road, Somerset

Where we work

Taunton and the Towns Around It

Taunton is about 45 miles from our base in Bristol, straight down the M5. We cover the town and the area around it, including:

  • Monkton Heathfield
  • Staplegrove
  • Norton Fitzwarren
  • Bishops Hull
  • Trull
  • Galmington
  • Priorswood
  • Creech St Michael
  • Ruishton
  • Henlade
  • Kingston St Mary
  • Bishops Lydeard
  • Wellington
  • Wiveliscombe
  • North Petherton
  • Bridgwater
  • Ilminster
  • Langport

FAQs

Diamond Drilling in Taunton: Your Questions

Do you travel to Taunton?

Yes. Taunton is about 45 miles down the M5 from our base in Bristol. We cover the town and nearby places like Wellington, Bishops Lydeard, North Petherton and Bridgwater.

Do I need a structural engineer for a new doorway?

If the wall is load-bearing, yes. The engineer specifies the lintel or steel and how the wall is supported while it's cut. We cut once that support is in place.

Why are the corners cored first?

A round saw blade can't cut a square corner without running past it. Coring the corners first lets each cut stop exactly at the corner, so there's no over-cut in the wall.

How long does it take to cut a door opening?

A standard doorway in a block or brick wall is usually cut and removed in a day, once the props and support are in place. Thick concrete takes longer.

Can you cut openings in occupied offices?

Yes. Wall sawing is water-cooled, so there's very little dust, and the slurry is collected and cleaned up as the work goes.

How do I get a price for a job in Taunton?

Send photos, the sizes and any engineer's drawings. A fixed price and a cutting day come back from Liam, usually within 24 hours.

Get a Free Quote in Taunton

Send photos, sizes and any engineer's drawings. Liam replies within 24 hours with a fixed price and a date for your Taunton job.

Call Liam07833 445534