Portishead & North Somerset

Diamond Drilling & Concrete Cutting in Portishead

Core drilling, saw cutting and chasing for Portishead's marina apartments, family homes and commercial units, just down the M5 from our Bristol base.

  • DSA Member
  • Concrete Frame Buildings
  • Free Quotes
5.0 from 19 Google reviews
Rig-mounted hydraulic core drill cutting a large core through a wall
120+Jobs Completed
Liam PalmerFounder & Diamond Driller
Liam Palmer, founder of LAP Diamond Drilling, carrying a concrete core on site

Working in Portishead

From Docks and Power Stations to a Marina Town

Portishead's waterfront used to be a deep-water dock with two coal-fired power stations beside it. The dock closed in 1992, and the site was rebuilt as Port Marine: a marina surrounded by thousands of new homes, from townhouses to concrete-framed apartment blocks.

Behind the new waterfront is the older town, with Victorian and post-war houses climbing the hill towards the High Street. That mix means very different jobs within a mile of each other: coring through reinforced concrete in a marina apartment one day, a soil pipe through an old brick wall the next.

01

Marina Apartments

Concrete-framed blocks around the marina need careful coring for new extract ducts, pipework and cables, with the steel in the slab found first so it isn't cut.

02

Older Homes Up the Hill

Brick and stone houses in the older streets need holes for soil pipes, boiler flues and extractor fans, plus chasing when kitchens and bathrooms are refitted.

03

Units Near the Docks

Commercial and industrial units on the edge of town and around Portbury need service cores, floor cuts and new openings during fit-outs.

Coring reinforced concrete

Drilling Between the Steel

Most of Portishead's newer apartment blocks have reinforced concrete floors and walls. Steel bars run through the concrete in a grid, and cutting through one can weaken the slab, so the first job is finding them.

The area is scanned before drilling and the bars are marked on the surface. The core is then positioned in the gap between them, so the hole goes through clean concrete only. If a bar can't be avoided, the structural engineer is asked before it is cut.

Some modern slabs are post-tensioned, with steel cables under high tension inside them. Those cables must be located and checked by a specialist before any drilling, and we'll always ask before coring a slab we're unsure of.

Slab seen from above

Find the bars, core the gap

Diagram of cores placed between the steel bars in a reinforced concrete slabA concrete slab seen from above with a grid of steel reinforcing bars marked on the surface after scanning. Two cores are positioned in the clear gaps between the bars, and a crossed-out core shows a position that would cut through a bar.Bar markedafter scanningCore sits inthe clear gapWould cuta bar: avoidReinforced concrete slab, plan view
Illustration only. Bar spacing and depth vary, which is why the slab is scanned before every core.

Methods we use in Portishead

Rig Coring Through Slabs

Rig-mounted coring through concrete floors for soil stacks, risers and extract ducts, positioned between the reinforcement.

Coring Through Brick Walls

Soil pipe, flue and fan holes through the brick and stone walls of older houses, cut cleanly with no hammering.

Kitchen and Bathroom Chasing

Chases for new cables and pipes when kitchens and bathrooms are refitted, cut to depth with dust extraction.

Openings in Block Walls

Straight-edged openings for doors and hatches in block and concrete walls, with props in place where they're needed.

What we do in Portishead

Our Services in Portishead

Our three core services across Portishead, from apartments around the marina to houses in the older streets and units by the docks.

Core Drilling in Portishead

Cores through reinforced concrete floors and walls in the marina blocks, and through brick and stone in the older houses, for pipes, ducts and cables.

Diamond core drilling →

Saw Cutting in Portishead

Openings in walls, cut-outs in floor slabs and trenches for drains. Openings in structural walls need an engineer's design and support before cutting.

Concrete saw cutting →

Chasing in Portishead

Wall and floor chases for electricians and plumbers refitting kitchens, bathrooms and flats, cut to depth with a dust-extracted chaser.

Wall and floor chasing →

Coring through a reinforced slab? Read core drilling through reinforced concrete before you book.

Our process

How a Portishead Job Works

Most Portishead jobs are priced from photos, with no site visit. For apartments, it helps to send any building drawings or management company rules too.

01

Photos, Sizes and Drawings

Photos of the wall or floor, the hole sizes and positions, and any drawings or notes from the building's management company.

02

Fixed Price and Booking

Liam confirms a fixed price and a date, usually within 24 hours, and checks parking and working-hours rules for the building.

03

Scan and Mark Up

The slab or wall is scanned, reinforcement marked on the surface, and the cores positioned in the clear gaps.

04

Core, Clean and Finish

Holes cored, water and slurry collected as it's drilled, and the area left clean for the next trade.

Send your job
Get a Free Quote

Tell us about the job and add a few photos. Liam replies with a fixed price, usually within 24 hours.

Rather send photos on WhatsApp? Message Liam on 07833 445534

Recent job nearby

Track Sawing Concrete Walls at Avonmouth

Just across the mouth of the Avon from Portishead, Liam cut through thick concrete walls inside a large industrial building at Avonmouth, using a track-mounted wall saw.

The saw runs along a rail fixed to the wall, so long, deep cuts stay perfectly straight, and big sections can be cut out in blocks and lifted away.

Track sawing through thick concrete walls in an industrial building at Avonmouth (1 of 4)
Track sawing through thick concrete walls in an industrial building at Avonmouth (2 of 4)
Track sawing through thick concrete walls in an industrial building at Avonmouth (3 of 4)
Track sawing through thick concrete walls in an industrial building at Avonmouth (4 of 4)

Where we work

Portishead and the Coast Around It

Portishead is about 10 miles from our base in Bristol, down the M5. We cover the town and the surrounding area, including:

  • Port Marine
  • Portishead Marina
  • Redcliffe Bay
  • West Hill
  • Portbury
  • Easton-in-Gordano
  • Pill
  • Abbots Leigh
  • Clapton-in-Gordano
  • Walton-in-Gordano
  • Weston-in-Gordano
  • Clevedon
  • Nailsea
  • Wraxall
  • Long Ashton
  • Backwell
  • Weston-super-Mare

FAQs

Diamond Drilling in Portishead: Your Questions

Do you cover Portishead and the Gordano villages?

Yes. Portishead is about 10 miles from our base in Bristol. We cover the town and nearby places like Portbury, Pill, Easton-in-Gordano, Clevedon and Nailsea.

Can you core through the concrete floor of a marina apartment?

Yes. The slab is scanned first so the core can be placed between the steel bars. We may also need sign-off from the building's management company before drilling.

What if the slab is post-tensioned?

Post-tensioned slabs contain steel cables under high tension, so they must be located by a specialist before any drilling. Let us know if you're unsure and we'll check before booking.

Can you drill a soil pipe hole through an old brick wall?

Yes. Soil pipe, flue and fan holes are cored through brick and stone with a diamond core drill, so the hole is round and clean and the wall around it isn't shaken loose.

Do you keep the mess down in occupied flats?

Yes. Water from the core drill is collected at the hole, chasing uses dust extraction, and floors and furniture are covered before work starts.

How do I get a price for a job in Portishead?

Send photos, the hole sizes and any drawings. Liam sends back a fixed price and a date, usually the same day or the next.

Get a Free Quote in Portishead

Send photos, hole sizes and any drawings. Liam replies within 24 hours with a fixed price and a date for your Portishead job.

Call Liam07833 445534